{"id":344,"date":"2008-12-20T15:45:29","date_gmt":"2008-12-20T22:45:29","guid":{"rendered":"http:\/\/blog.oliverhansen.com\/?p=344"},"modified":"2009-01-12T15:59:30","modified_gmt":"2009-01-12T22:59:30","slug":"moving-and-organizing-my-home-server-closet","status":"publish","type":"post","link":"https:\/\/blog.oliverhansen.com\/index.php\/2008\/12\/20\/moving-and-organizing-my-home-server-closet\/","title":{"rendered":"Moving and Organizing My Home Server Closet"},"content":{"rendered":"

I actually did this back in August but I didn’t get around to uploading the photos til today so here it is!<\/strong><\/p>\n

Some wise person suggested that since I had a free room that I move my servers<\/a> to the closet in that room instead of keeping them in my own closet. I’ve gotten used to closing the door to the walk-in closet each night to lessen the noise of the fans but having them in another room would be even better! I decided if I was going to do this that I should do it a little better than last time. I now have three servers: One acting as my router and running IPCop<\/a>, a second running a web server<\/a> for local development and testing, and a third running Samba<\/a> and acting as my main file server. It started as just one and grew to more.<\/p>\n

Instead of taking up more floor space, I decided to stop by the local thrift store and find some sort of small desk. I found a pretty beat up rolling desk and paid $10 for it. One wheel fell off while I was rolling it out to the car but oh well. haha. Anyways, it fit in the closet and had two levels for my computers to sit on.<\/p>\n

I had some zip ties and cable running hardware from when I planned to re-run my grandma’s phone line a while back so I used those to run the cable along the wall instead of the gaff tape I used previously. I couldn’t mount the switch on the wall but I did put it up above on the top shelf of the closet. I used zip ties as cable management to run the permanent cables up to the switch. As I get more or have temporary cables I won’t worry about the neatness so much but at least the existing cables are managed nicely. It’s not perfect by any standards but I think it’s a step up and not bad for an amateur with a couple hours. <\/p>\n

Photos below:
\n
\n\n\t\t\t